bravo company picatinny bcmgunfighter mod 3 vertical grip picatinny bcmgunfighter mod 3 vertical grip polymer black

Bravo Company Picatinny Bcmgunfighter Vertical Grip Picatinny Bcmgunfighter Vertical Grip Polymer Black

Slightly angled vertical grip attaches facing forward or in reverse, providing added comfort while accommodating preference and shooting style. A forward tilt increases the rigidity of the forearm and allows for more natural wrist angle, or switch to a rearward mount to enhance control when grabbing the handguard and grip. Flat sides with aggressive texturing and raised horizontal ridges on the frontstrap and rearstrap ensure rotational control and solid grasp. Hinged trap door on the bottom opens by squeezing two tabs on each side to access an internal storage compartment, sealed with a water-resistant rubber plug and generously sized for spare parts and accessories. Metal crossbolt secu Mfg: Bravo Company SPECS: Impact-resistant polymers, Black or Flat Dark Earth. 4-7/8" (12.4cm) OAL. Grip handle approx. 4-1/8" (10.5cm) long, 1¾" (4.4cm) wide, 1-1/8" (2.9cm) thick. Storage compartment 3¾" (9.5cm) deep. 3.7 oz. (104.9g) wt. Fits any 1913 Picatinny tactical rai

Magpul Picatinny Afg1 Angled Fore Grip Picatinny Afg1 Angled Fore Grip Polymer Dark Earth

Low-profile forward grip/hand stop takes advantage of natural body mechanics to give the shooter more precise control, faster pointing, and less operator fatigue. The Magpul AFG (Angled Fore-Grip) positions the support hand close to the centerline of the bore for maximum recoil control to aid in fast, accurate follow-up shots. Provides a consistent reference point for finding the correct hand position quickly when mounting the weapon under stress. The natural, ergonomic hand position with the palm facing up results in better blood flow than the "clenched fist" stance often used with vertical grips that leads to fatigue and loss of sensation during long periods in the re Mfg: Magpul SPECS: Reinforced molded polymer, Black, Dark Earth, or O.D. Green. Fits Picatinny-type rails. AFG1 - 5½" (14cm) long, approximately 15⁄8" (4.1cm) wide, extends approximately 1¾" (4.5cm) below rail. 2.8 oz. (79g) weight.

Bravo Company Ar 15 Gunfighter Comp Mod 0 22 Caliber Gunfighter Comp Mod 0 22 Caliber 1 2 28 Ss Black Oxide

The Gunfighter compensator reduces muzzle rise and flash, with a special baffling system that also limits side blast and the noise associated with typical compensators. Exterior dimensioned to accept blank firing adapter or flash hider mounted suppressors. Stainless steel construction and black oxide finish help resist heat and corrosion. Gunsmith installation recommended. Standard Length fits .223/5.56mm rifles. Extended Length models for both .223/5.56 and .308/7.62mm rifles brings 14.5" barrels up to 16". Mfg: Bravo Company SPECS: Stainless steel, oxide finish, matte black. .830" (2.1cm) O.D. Washer included. Standard 1.7" (4.4cm) long, with ½"-28 threads. Extended 2.1" (5.5cm) long, with ½"-28 (.223/5.56) or 5/8"-24 threads (.308/7.62).

Bravo Company Keymod Picatinny Rail Sections Flat Dark Earth Keymod Picatinny Nylon Rail Section 4 Inch Fde

Rail section is made of Lightweight Impact Resistant Polymer. Mounting hardware is made of Corrosion Resistant Stainless Steel Made to the Mil-Standard 1913 Picatinny Arsenal Specifications. Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot) Features a Snag resistant design, while retaining Mil-Standards specs. Self-contained assembly, eliminates the possible loss of mounting hardware. Fits ALL KeyMod interface mounting surfaces. Mfg: Bravo Company

Spuhr Picatinny Rail Accessories 14mm High Isms Picatinny Rail

The "Ideal Scope Mount System" have interface surfaces directly on the mount, making it possible to mount accessories either by picatinny rails or as direct interfaces. These picatinny rails mount directly to your SPUHR mount or rings and allow you to mount additional accessories. Mfg: Spuhr

Precision Reflex Remington 7615 Picatinny Rail Scope Base Rem 7615 Picatinny Base

Precision machined, MIL-STD 1913 Picatinny rail allows mounting optics and tactical sights for maximum accuracy. Low profile design features fourteen cross-slots for easy ring spacing adjustments to accommodate different-length scope tubes. Four, steel, 8-40 Allen head screws secure rail to receiver for exceptional holding power. Precision machined from 6061-T6 aluminum, then hardcoat anodized for added strength. Easy installation using factory pre-drilled scope base holes, requires no alterations to rifle. Accepts both Picatinny and Weaver-style rings. Mfg: Precision Reflex, Inc. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 6" (15cm) long. 1.4 oz. (40g) weight. Includes steel mounting screws. Fits all Remington 7615 pump action rifles with factory drilled and tapped receivers.

Sig Sauer P320 P250 Grip Modules Grip Module Assy Full 45 Large

Grip modules for the Sig P320/P250 Mfg: Sig Sauer

Hogue Handall Beavertail Grip Sleeves Handall Beavertail Grip Sleeve Black Glock 42 43

The new grip sleeves are designed to fit specific polymer pistols now on the market. The Beavertail Grip Sleeve line has been engineered with models for precision fits on specific firearms. The initial offerings in this series has sleeves designed for perfect fits on three sizes of polymer firearms. While each sleeve has been created for a precise fit on specific polymer framed firearms, they also alternatively fit many other similarly sized firearms with a fully functional and aesthetic fit. The Beavertail Grip Sleeves are installed by slipping them over the frame of the firearm until seated into perfect position. Once installed, the HandALL sleeve provides a single finger groove for ins Mfg: Hogue

Pearce Grip Grip Extension For Glock Glock 43 Plus 1 Grip Extension

Lets you use your entire hand to grip the gun for better recoil control and more consistent shot placement. Extended "shelf" for the little finger attaches in place of the factory magazine base. Makes shooting these little "handfuls" a lot more comfortable. Mfg: Pearce Grip SPECS: Impact-resistant plastic, black.